Welcome to MovieandPop.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

3rd Channel for SD MixPre

  
   Movie Forums (Home) -> Movie Sounds RSS
Related Topics:
MixPre Mod - Bought a used MixPre. To get the 48volt to stop padding down I just have to remove a Anything else worth doing while I have it open? Is the headphone pot a "off the Switches are also a bit noisy.

looking for used MixPre or... - Hi, I'm looking for used SD MixPre or Shure FP24 to add 2 inputs to my SD 302. Budget is always a the lower the cost, the better. if you have one that you can't sell because it is look at it! (you

MixPre for sale - Please email me if you are in buying a used Sound Devices MixPre. The unit is in like new as new. Never dropped or rented out. Spent most of it's two years in a doc bag waiting to feed a HHB in a doc/film package..

MixPre & Minidisc vs. Microtrack or R1 - Hello all! Any opinions on preamps? I am looking for a setup and already own a portable minidisc recorder. Problem is that the mic pre in the minidisc isn't quite up to snuff so I have been looking for a better front end. The MixPre sounds (and has a.

MixPre Service manual - Hi Does anyone have a PDF of a service manual for a MixPre? Adam -- Adam Dansfield 021 455997
Author Message
MitchB4610

External


Since: Jul 15, 2006
Posts: 43



(Msg. 1) Posted: Tue Oct 17, 2006 9:04 am
Post subject: 3rd Channel for SD MixPre
Archived from groups: rec>arts>movies>production>sound (more info?)
My SD MixPRe is great for about 90% of the run & gun stuff I do. But I
'd like to be able add a 3rd channel w/o pulling out my larger and
heavier 4x2 mixer. Ambient TinyMix II perhaps?
Any suggestions ? Thanks for your help.
Mitch

 >> Stay informed about: 3rd Channel for SD MixPre 
Back to top
Login to vote
cmassey

External


Since: Jan 30, 2006
Posts: 114



(Msg. 2) Posted: Tue Oct 17, 2006 6:03 pm
Post subject: Re: 3rd Channel for SD MixPre [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Right on the spot Oleg...buy a SD302, make up the cables to enable the
return to be one more channel, then the 4x2 can stay off your shoulder
a lot longer...

And this is a testimonial...my 4x2 is visiting the sonic hospital, so
when I needed a fourth input, of course "unannounced by production",
out came the cable, menu setup to sent it to the right side and I was
in business...albeit it was a 411 with line level out!!!

Actually keep the Mixpre just in case you have something you can sit
down and do and need more than the three!!!

just my .02 worth!!!!

 >> Stay informed about: 3rd Channel for SD MixPre 
Back to top
Login to vote
Oleg Kaizerman

External


Since: Mar 07, 2005
Posts: 1489



(Msg. 3) Posted: Tue Oct 17, 2006 6:19 pm
Post subject: Re: 3rd Channel for SD MixPre [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
sell yours- buy sd 302 - not much more in weight

--
Oleg Kaizerman (gebe) Hollyland

"MitchB4610" <mitchb4610.TakeThisOut@aol.com> wrote in message
news:1161101051.180362.306710@h48g2000cwc.googlegroups.com...
> My SD MixPRe is great for about 90% of the run & gun stuff I do. But I
> 'd like to be able add a 3rd channel w/o pulling out my larger and
> heavier 4x2 mixer. Ambient TinyMix II perhaps?
> Any suggestions ? Thanks for your help.
> Mitch
>
 >> Stay informed about: 3rd Channel for SD MixPre 
Back to top
Login to vote
Soundhaspriority

External


Since: Oct 01, 2006
Posts: 182



(Msg. 4) Posted: Mon Oct 23, 2006 6:16 pm
Post subject: Re: 3rd Channel for SD MixPre [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"cmassey" <cmassey26.RemoveThis@earthlink.net> wrote in message
news:1161133410.567831.80510@i42g2000cwa.googlegroups.com...
> Right on the spot Oleg...buy a SD302, make up the cables to enable the
> return to be one more channel, then the 4x2 can stay off your shoulder
> a lot longer...
>
> And this is a testimonial...my 4x2 is visiting the sonic hospital, so
> when I needed a fourth input, of course "unannounced by production",
> out came the cable, menu setup to sent it to the right side and I was
> in business...albeit it was a 411 with line level out!!!
>
> Actually keep the Mixpre just in case you have something you can sit
> down and do and need more than the three!!!
>
> just my .02 worth!!!!
>
Cleve, how do you use the third channel, given it has only two outs? You
ride gain?

Bob Morein
Dresher, PA
(215) 646-4894
 >> Stay informed about: 3rd Channel for SD MixPre 
Back to top
Login to vote
Display posts from previous:   
   Movie Forums (Home) -> Movie Sounds All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]