Zaxcom Rx diagnostic menu

Just read a post from 2004 while researching.. It was a preliminary
review of the 1st generation stereoline eng set. It was mentioned
that there is a option in a diagnostic menu on the Rx that allows you
to check to see if any dropouts occured. A feature that offers an
after the fact signal solidarity check. Seems handy. I've owned a
unit for years. Never knew. Anyone Using this feature? If so, howsit
done?

On Feb 16, 12:26 am, Marc wrote:
> Just read a post from 2004 while researching.. It was a preliminary
> review of the 1st generation stereoline eng set.  It was mentioned
> that there is a option in a diagnostic menu on the Rx  that allows you
> to check to see if any dropouts occured. A feature that offers an
> after the fact  signal solidarity check. Seems handy. I've owned a
> unit for years. Never knew. Anyone Using this feature? If so, howsit
> done?

Hold the up and down arrow keys while you are powering up. This will
open an extended menu. Keep hitting the menu button until you come to
a screen with a letter followed by 8 zeros. Each group of 4 zeros
shows the error correction occurring on each side of the diversity
receiver. When the letter increments it shows a fatal error has
occurred.
Billy Sarokin