|
Related Topics:
| WTB: Lectro Block 25 Receivers - I have two UM400 block 25 and looking to either get some receivers for these or sell the tx's.
Hot Lectro receivers - I ran a two receivers (UCR 200D and a UCR 205D) in a bag today for 9 hours. The receivers got very hot. I was using a lithium ion NP1 that is 16 V when fully charged, but this should be fine with the Since there are 4
camera mounts for wireless receivers - I am looking buy a camera mount for my wireless I've got Lectro 210's and need to easily set up a camera for one or two receivers without a lot of time, tools or hassle. The cameras are already set up with gold mount plates. I've looked into..
WTB: Lectro 200 or 400-Block 27 only - If available contact off group. Eric
LTB: Block 22 Lectro TX - Looking to purchase a block 22 to pair up with a recently purchased UCR200D. If anyone has a beltpack or buttplug tx, I enjoy the secondary market. send pics if you got em.
|
|
|
Next: Lectrosonics 211 receiver output question microph..
|
| Author |
Message |
External
Since: Jun 07, 2007
Posts: 8
|
(Msg. 1) Posted: Sun Jul 08, 2007 5:56 pm
Post subject: lectro ifb & wireless receivers on same block?
Archived from groups: rec>arts>movies>production>sound (more info?)
|
|
|
i think i know the answer to this already, but is it possible if i had
a lectro ifb and 211 wireless receiver on the same block, could i send
matching transmitter freq to both? i.e. i mix the dialog while the
client listens to the same wireless frequency when doing a single on-
cam, etc... someone said this was not possible because they are built
differently, but i just wanted to make sure.
kp |
|
| Back to top |
|
 | |
External
Since: May 27, 2007
Posts: 592
|
(Msg. 2) Posted: Sun Jul 08, 2007 5:56 pm
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
dont try it with your client :-)
he would hear something and it wouldnt be pleasent at all
you can make y connector to your lavalier and send the signal to both
transmiters if you dont use mixer
"osa" <ken.petrosky.RemoveThis@gmail.com> wrote in message
news:1183927914.580077.119910@q75g2000hsh.googlegroups.com...
>i think i know the answer to this already, but is it possible if i had
> a lectro ifb and 211 wireless receiver on the same block, could i send
> matching transmitter freq to both? i.e. i mix the dialog while the
> client listens to the same wireless frequency when doing a single on-
> cam, etc... someone said this was not possible because they are built
> differently, but i just wanted to make sure.
>
> kp
> |
|
| Back to top |
|
| |
External
Since: Jul 08, 2007
Posts: 5
|
(Msg. 3) Posted: Mon Jul 09, 2007 4:44 pm
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 9, 4:51 am, osa <ken.petro... RemoveThis @gmail.com> wrote:
> i think i know the answer to this already, but is it possible if i had
> a lectro ifb and 211 wireless receiver on the same block, could i send
> matching transmitter freq to both? i.e. i mix the dialog while the
> client listens to the same wireless frequency when doing a single on-
> cam, etc... someone said this was not possible because they are built
> differently, but i just wanted to make sure.
>
> kp
Kp, thanks for poping that question, I had a similar question in my
mind and was going to ask the rest. Is it possible to use 1
transmitter (SM or UM400) to send to 2 or more 411s at the same time?
Thanks,
Lawrence >> Stay informed about: lectro ifb & wireless receivers on same block? |
|
| Back to top |
|
| |
External
Since: Jul 08, 2007
Posts: 5
|
(Msg. 4) Posted: Mon Jul 09, 2007 4:50 pm
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Apr 25, 2007
Posts: 5
|
(Msg. 5) Posted: Mon Jul 09, 2007 7:05 pm
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
osa wrote:
> i think i know the answer to this already, but is it possible if i had
> a lectro ifb and 211 wireless receiver on the same block, could i send
> matching transmitter freq to both? i.e. i mix the dialog while the
> client listens to the same wireless frequency when doing a single on-
> cam, etc... someone said this was not possible because they are built
> differently, but i just wanted to make sure.
>
> kp
>
The answer would be No. The deviation on the IFB is 20Khz, and the
deviation on the Lectro 200 series is 75Khz. The 200 tx and the IFB rx
are not compatible. >> Stay informed about: lectro ifb & wireless receivers on same block? |
|
| Back to top |
|
| |
External
Since: Jun 04, 2007
Posts: 155
|
(Msg. 6) Posted: Tue Jul 10, 2007 9:39 am
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Jul 08, 2007
Posts: 5
|
(Msg. 7) Posted: Tue Jul 10, 2007 10:00 am
Post subject: Re: lectro ifb & wireless receivers on same block? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 11, 12:39 am, Noah Timan <dontwritemeher....DeleteThis@yahoo.com> wrote:
> On Jul 9, 7:44 pm, lc <lcmu....DeleteThis@pd.jaring.my> wrote:
>
> > Kp, thanks for poping that question, I had a similar question in my
> > mind and was going to ask the rest. Is it possible to use 1
> > transmitter (SM or UM400) to send to 2 or more 411s at the same time?
>
> Yes.
>
> nvt
Thanks Noah >> Stay informed about: lectro ifb & wireless receivers on same block? |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in
