mic level for IFB

Hi Jay,
Glad to hear the line level worked. I included the previous wiring for
the line level example in case others have dumped the original post
as I did. (Thank goodness for Google Groups; everything is saved.)

Use 200 Ohm (200 to 500 is OK.) resistors in place of the 10 k's
listed below and use the TA5 pin 3 input in place of theTA5 pin 5.
Don't tie the TA5 pin 4 to the TA5 pin 1. The TA5 pin 1 is still
common ground back to the PD6.

In short, same as before except, 200 Ohms instead of 10 k's, pin 3
instead of pin 5 and no connection between pin 4 and pin 1.

Let us know if it works OK.
Larry Fisher
Lectrosonics