output level on Lectro 411a ?

Jeff,

We hope you are doing OK down in Metairie.

Jon Tatooles
Sound Devices, LLC


"Jeff C" <soundmixer77 RemoveThis @gmail.com> wrote in message
news:1124908786.115407.63650@g47g2000cwa.googlegroups.com...
> Thanks Larry,
>
> It makes a lot of sense now, I do not normally have ground loop issues
> but I have had them with more than one camera running on "shore power".
> I never knew why but it always seemed to work better on the
> multicamera shoots to go line level...
>
> Regards,
> Jeff
>
> P. S. all---I will have a couple of 190 systems (block 21-22) for sale
> soon. e: if interested
>
 >> Stay informed about: output level on Lectro 411a ? 

Hi Dan,
You are correct; there is no difference in power consumption. The
UCR411 runs "wide open" at all times and the mic level and
intermediate output levels are set by attenuation of a line level
signal. One big benefit of this, is that we can assure the user that
there are no "gain" settings of the receiver that can clip the signal.
Best Regards,
Larry Fisher
Lectrosonics

On 31 Aug 2005 05:14:35 -0700, "d rosen"
<danielrosen RemoveThis @blueyonder.co.uk> wrote:

>
>hi larry,
>
>just wanted to check with you that what your saying (above) also means
>that there is no(?) difference in power consumption between running the
>411 at line or mic level. or that there is certainly no less power
>consumption running at a mic level?
>
>dan
 >> Stay informed about: output level on Lectro 411a ? 

Thanks Jon,

myself, my dog, the 442 & gear are safe in Tennesse now. Seeing the
reports, nothing else seems to matter exept the safety of those who
stayed. lucky to be here at all..

Jeff Colon
 >> Stay informed about: output level on Lectro 411a ?